FAQs

Guidelines for maintenance.

• Fabric can be wiped with a damp cloth to remove normal surface dust. No other treatment should be used as this could damage the finish. Do not roll up blind when damp,otherwise mould could form. Sun dry if necessary.
• Vacuum occasionally.

Guidelines for measurement.

• What you would need.
  • Tape measure (metal ones are best)
  • Pen and paper
  
  
• Instructions to follow.
  
  
  • Outside Mount
  
  
  • 
    
    For all types of blinds follow these instructions if you want, your blind to hang outside the window recess:
    
    
    • Measure the exact drop from the top of where you want your blind to be to the bottom. Usually a 2 inch on bottom; 3-5 inch on top from the window sil is preferred. Note down the measurement.
    
    
    • Measure the exact width of where you'd like your blind to be. usually a 2 inch on either side of the window is preferred. Note down the measurement. Make sure your width is measured before the height and is clearly marked.


• Inside Mount


• 
  
  For all types of blinds follow these instructions if you want, your blind to hang inside the window :
  
  
  • Measure the drop by taking the measurement from the top of the recess to the window sill in 3 places as shown. Note down the shortest measurement - this is the one we'll use. Then take 1inch deduction. Note down the measurement.
  
  
  • Measure the width of the recess from wall to wall in 3 places as shown. Note down the shortest measurement. Then take of a 1 inch deduction.